LS2000
The LS2000 is a low-cost level switch that can measure virtually any liquid, dry material or interface of electrically conductive or non-conductive products. The propriety radio frequency (RF) balanced impedance bridge has exceptional temperature stability, eliminating the need to recalibrate the unit from season to season.
All the necessary calibration indicators are on-board so all you need to calibrate the LS2000 is a small screwdriver. Failsafe electronics provide peace of mind and the modular nature makes trouble shooting and repair simple and quick.
The probe is made of solid 316 stainless steel rod, and the insulator is UHMWPE (Ulra High Molecular Weight Polyethylene) , which has excellent abrasion and impact resistance. The seals are Viton 'O' rings and all the electronics are housed in a cast aluminium enclosure.
Download product leaflet here
LS6000
The LS6000 is a basic feature level switch, similar to the LS2000 but with more power supply choices, a second switched output and an explosion proof housing.
It incorporates the same proprietary radio frequency (RF) balanced impedance bridge with exceptional temperature stability, eliminating the need for frequent recalibration.
Like the LS 2000 all the calibration indicators are
on board.
The probe is made of solid 316 stainless steel rod, the
insulator is made of Delrin (Teflon and other materials
optional). The seals are made with Viton “O” rings. All
the electronics are housed in a cast aluminium explosion
proof enclosure.
LS7000
The LS7000 is a full-featured sensor, based on the LS6000 but with onboard fuse, static and surge protection for applications like plastic pellets where static may be a problem.
A built in timer allows the user to select an ON or an OFF delay for up to 2 hours, so wave action in a turbulent vessel can be ignored or a vessel can be discharged to a lower level automatically.
Like the other probes in the Babbit range, the
proprietary radio frequency (RF) balanced impedance
bridge has exceptional temperature stability,
eliminating the need to for annual adjustments to the
calibration.
Again, all ll the necessary calibration indicators are
on-board so all you need to calibrate the LS7000 is a
small screwdriver. Failsafe electronics provide peace of
mind and the modular nature makes troubleshooting and
repair simple and quick.
The probe is made of solid 316 stainless steel rod, and the insulator is UHMWPE (Ulra High Molecular Weight Polyethylene) , which has excellent abrasion and impact resistance. The seals are Viton 'O' rings and all the electronics are housed in a cast aluminium enclosure.
The probe is made of solid 316 stainless steel rod, and the insulator is made of Teflon. The seals are made with Viton "O" rings. All the electronics are housed in a cast aluminum explosion-proof enclosure. Special materials of construction are available.
LS8000
The LS8000 with its remote electronics is ideal for applications where it is unsafe or inconvenient to mount the electronics directly onto the probe on the vessel.
A maintenance free epoxy- encapsulated transmitter is mounted in the explosion proof head of the probe. The receiver board can be mounted up to a mile from the transmitter, which is connected to the receiver with a twisted, shielded pair of wire. The receiver board is wired to the power supply and has all the calibration adjustments and the relay output.
Virtually any liquid, dry material or interface of electrically conductive or non-conductive product can be measured and the proprietary radio frequency (RF) balanced impedance bridge with exceptional temperature stability, eliminates the need for frequent recalibration.
The probe is made of solid 316 stainless steel rod, and the insulator is made of Teflon. The seals are made with Viton "O" rings. The transmitter electronics are housed in a cast aluminum explosion-proof enclosure.